Hyundai Kona: Installing a Child Restraint System (CRS) / Suitability of each seating position for "universal" category belted Child Restraint Systems according to ECE regulations

Hyundai Kona (OS) 2018-2020 Owners Manual / Safety system of your vehicle / Child restraint system (CRS) / Installing a Child Restraint System (CRS) / Suitability of each seating position for "universal" category belted Child Restraint Systems according to ECE regulations

U = Suitable for "universal" category Child Restraint Systems approved for use in this mass group.
U* = Suitable for "universal" category Child Restraint Systems approved for use in this mass group (When you install the child seat on Front Passenger seat, you should move the seat position to upward and the seat back position to forward properly, to restrain child seat.)
❈ Height adjustable device of Front passenger seat is an optional feature.
U** = Seating position not suitable for fitment of Child Restraint Systems with support leg.
UF = Suitable for forward facing "universal" category restraints approved for use in this mass group.
X = Seat position not suitable for children in this mass group.

WARNING

We recommend that a child restraint seat be installed in the rear seat, even if the front passenger's air bag ON/OFF switch is set to the OFF position. To ensure the safety of your child, the front passenger's air bag must be deactivated when it should be necessary to install a child restraint seat on the front passenger seat in exceptional circumstances.

Securing a Child Restraint System with a lap/shoulder belt
When not using the ISOFIX system, all Child Restraint Systems must be secured to a rear seat with the lap part of a lap/shoulder belt. Installing a Child Restraint System with a lap/shoulder belt To ...

i-Size Child Restraint Systems according to ECE regulations
\ i-U : Suitable for i-Size "universal" Child Restraint Systems forward and rearward-facing i-UF : Suitable for forward-facing i-Size "universal" Child Restraint Systems only X : Seat position not s ...

Other information:

Hyundai Kona (OS) 2018-2020 Owners Manual: Malfunction Indicator Lamp (MIL)
This warning light illuminates: When you set the ignition switch or the Engine Start/Stop button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction with the emission control system. In this case, we recommend that you have the vehi ...

Hyundai Kona (OS) 2018-2020 Service Manual: Head Lamp Leveling Switch Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the lower cra ...

© 2018-2020 www.hkona.com