Hyundai Kona: LCD display modes / Warning message mode

If one of followings occurs, warning messages will be displayed on the LCD display for several seconds.

- Low washer fluid (if equipped)
- Exterior lamp malfunction (if equipped)
- Blind-Spot Collision Warning (BCW) system malfunction (if equipped)
- Tire Pressure Monitoring System (TPMS, if equipped)
- High Beam Assist (HBA) malfunction (if equipped)
- Forward Collision-Avoidance Assist (FCA) malfunction (if equipped)

Assist mode
LKA/DAW This mode displays the state of the Lane Keeping Assist (LKA) system and Driver Attention Warning (DAW) system. Tire Pressure This mode displays information related to Tire Pressure. ...

User settings mode
In this mode, you can change the settings of the instrument cluster, doors, lamps, etc. 1. Head-up display (if equipped) 2. Driver Assistance 3. Door 4. Lights 5. Sound 6. Convenience 7. Service int ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Alternator Description and operation
Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal.In addition, the charging voltage of this alternator is regulated by the battery voltage detection system. The a ...

Hyundai Kona (OS) 2018-2021 Owners Manual: Engine oil
Checking the engine oil level (Gasoline engine) 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan. 4. Pull the dipstick out, wip ...

© 2018-2021 www.hkona.com