Hyundai Kona: Cylinder Block / Water Jacket Seperator Repair procedures

Remove and Installation
1.
Remove the cylinder head assembly.
(Refet to Cylinder Head Assembli - "Cylinder Head")
2.
Remove the water jacket seperator (A).

  
Be careful not to deform or damage it when removing.
3.
Install in the reverse order of removal.
Water Jacket Seperator Components and components location
Components 1. Water Jacket Seperator ...

Rear Oil Seal Components and components location
Components 1. Rear oil seal ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Front Driveshaft Repair procedures
Removal [Gamma 1.6 T-GDI, Nu 2.0 MPI] 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the front hub. Tightenin ...

Hyundai Kona (OS) 2018-2021 Service Manual: Tire Repair procedures
   • Using tires and wheel other than the recommended sizes could cause unusual handling characteristics and poor vehicle control, resulting in a serious accident. ...

© 2018-2021 www.hkona.com