Hyundai Kona: Engine Mechanical System / Cylinder Block
Hyundai Kona (OS) 2018-2020 Service Manual / Engine Mechanical System / Cylinder Block
- Components and components location
- External Damper Flywheel Components and components location
- External Damper Flywheel Repair procedures
- Water Jacket Seperator Components and components location
- Water Jacket Seperator Repair procedures
- Rear Oil Seal Components and components location
- Rear Oil Seal Repair procedures
- Piston and Connecting Rod Components and components location
- Piston and Connecting Rod Repair procedures
- Crankshaft Components and components location
- Crankshaft Repair procedures
- Cylinder Block Repair procedures
Cylinder Head Repair procedures
Removal
Engine removal is not required for this procedure.
•
Use fender covers to ...
Components and components location
Components
1. Cylinder block
2. Ladder frame
3. Crankshaft
4. Crankshaft upper bearing
5. Crankshaft lower bearing
6. Thrust bearing
7. Main bearing ...
Other information:
Hyundai Kona (OS) 2018-2020 Service Manual: Repair procedures
Adjustment
1.
Place the car on a flat surface and check whether the body and trunk
lid are well-aligned.
2.
After loosening the liftgate hinge (A) mounting bolt, adjust the liftgate
by moving it up and down or from side to side. ...
Hyundai Kona (OS) 2018-2020 Service Manual: Blower Motor Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a known-good
blower motor and check for proper operation.
...
© 2018-2020 www.hkona.com