Hyundai Kona: Audio / Audio Remote Control Repair procedures

Hyundai Kona (OS) 2018-2026 Service Manual / Body Electrical System / Audio / Audio Remote Control Repair procedures

Inspection

Check for resistance between terminals in each switch position (LH).

[LH : Audio + Hands free]

Switch	Connector terminal	Resistance (±5%)
SEEK Up	1 - 6	430 Ω
SEEK Down		1.11 kΩ
MODE		2.11 kΩ
MUTE		3.11 kΩ
Volume (+)		4.61 kΩ
Volume (-)		6.81 kΩ
Voice		10.71 kΩ
END		18.91 kΩ
SEND		40.91 kΩ

Check for resistance between terminals in each switch position (RH).

[RH : Trip + Cruise]

Switch	Connector terminal	Resistance (±5%)
Cancel	2 - 6	330 Ω
SET -		610 Ω
RES +		910 Ω
Cruise ON/OFF		1.38 kΩ
Cruise Mode		2.13 kΩ
Group	1 - 6	390 Ω
Trip Up		610 Ω
Trip Down		910 kΩ
Trip OK		1.38 kΩ
SCC ON / OFF		3.36 kΩ

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the steering wheel assembly. (Refer to Steering System - "Steering Wheel")

3.	Remove the steering lower cover (A).

4.	Loosen the steering remote control switch mounting screw.

5.	Remove the steering wheel remote control switch (A).

Installation

1.	Install the steering wheel remote control after connecting the connector.

2.	Connect the negative (-) battery terminal.

Audio Remote Control Schematic diagrams

Circuit Diagram [Audio + B/Tooth + Voice] [Trip] [Trip / Cruise] [Trip / Cruise/ Smart Cruise] ...

Multimedia Jack Schematic diagrams

Circuit Diagram ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Repair procedures
On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs. • If a DTC ...

Hyundai Kona (OS) 2018-2026 Service Manual:
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and t ...