Hyundai Kona: Blind-Spot Collision Warning (BCW) / Blind-Spot Collision Warning Switch Repair procedures
| Inspection |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad garnish assembly (LH).
(Refer to Body - "Main Crash Pad Assembly")
|
| 3. |
Disconnect the rheostat switch connector (A).
|
| 4. |
Operate the BCW switch, then check for continuity between terminals
of BCW switch connector.
|
Blind-Spot Collision Warning Switch Components and components location
Circuit Diagram
...
Blind-Spot Collision Warning Indicator Components and components location
Components
1. BCW Indicator
2. Side repeater lamp
...
Other information:
Hyundai Kona (OS) 2018-2026 Owners Manual: 4 Wheel Drive (4WD) LOCK Indicator Light
This indicator light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It illuminates for approximately 3 seconds and then goes off.
When you select 4WD Lock mode by pressing the 4WD LOCK button. - The
4WD LOCK mode is to increase the drive power ...
Hyundai Kona (OS) 2018-2026 Service Manual: Heater & A/C Control Unit (Manual) Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
3.
Remove the cr ...
