Ford Fusion: Using Adaptive Cruise Control (IF EQUIPPED) / Canceling the Set Speed. Resuming the Set Speed. Automatic Cancellation. Park Brake Application

Ford Fusion 2013–2020 Owners Manual / Cruise Control / Using Adaptive Cruise Control (IF EQUIPPED) / Canceling the Set Speed. Resuming the Set Speed. Automatic Cancellation. Park Brake Application

Canceling the Set Speed

Ford Fusion. Park Brake Application Press and release the button or tap the brake pedal.

Note: The system remembers the set speed.

Resuming the Set Speed

Ford Fusion. Park Brake Application Press and release the button.

Your vehicle speed returns to the previously set speed and gap setting. The set speed displays continuously in the information display when the system is active.

Note: Only use resume if you are aware of the set speed and intend to return to it.

Automatic Cancellation

Automatic cancellation can also occur when:

Park Brake Application

Automatic parking brake application and cancellation occurs if:

Overriding the Set Speed. Changing the Set Speed
Overriding the Set Speed WARNING: If you override the system by pressing the accelerator pedal, it does not automatically apply the brakes to maintain a gap from any vehicle ahead. When you press ...

Hilly Condition Usage. Switching Adaptive Cruise Control Off. Detection Issues
Hilly Condition Usage Select a lower gear when the system is active in situations such as prolonged downhill driving on steep grades, for example in mountainous areas. The system needs additional ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Relay Box (Passenger Compartment) Repair procedures
Fuse Inspection 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? 3. Are there any blo ...

Hyundai Kona (OS) 2018-2021 Service Manual: Boost Pressure Sensor (BPS) Repair procedures
Inspection 1. Connect a GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification : Refer to "Specification" Removal ...

© 2018-2021 www.hkona.com