Hyundai Kona: 4 Wheel Drive (4WD) System
Hyundai Kona (OS) 2018-2021 Service Manual / 4 Wheel Drive (4WD) System
- Specifications
- Special service tools
- Transfer Assembly
- Transfer Fluid Repair procedures
- Front Wheel Transfer Assembly Repair procedures
- Oil Seal Repair procedures
- 4WD Control System
- Repair procedures
- 4WD ECU Components and components location
- 4WD ECU Description and operation
- 4WD ECU Schematic diagrams
- 4WD ECU Repair procedures
- Coupling Assembly
- Direct Electro Hydraulic Actuator Coupling Components and components location
- Direct Electro Hydraulic Actuator Coupling Description and operation
- Direct Electro Hydraulic Actuator Coupling Repair procedures
- Oil hydraulic Motor(Actuator) Description and operation
- Oil hydraulic Motor(Actuator) Repair procedures
- Pressure Sensor Description and operation
- Pressure Sensor Repair procedures
Clutch Engagement Fork and Engagement Bearing Repair procedures
Removal
1.
Remove the dual clutch assembly.
(Refer to Dual Clutch System - "Dual Clutch Assembly")
2.
Remove the clutch e ...
Specifications
Specifications
Tightening Torques
Items
N.m
kgf.m
lb-ft
Transfer assembly mounting bolts
60.8 - 65.7
...
Other information:
Hyundai Kona (OS) 2018-2021 Service Manual: Power Door Mirror Actuator Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door quadrant inner cover (A).
3.
Disconnect the power door mirror connector from the harnes ...
Hyundai Kona (OS) 2018-2021 Service Manual: Blower Resistor (Manual) Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower
resistor must be replaced. (After removing the resistor)
...
© 2018-2021 www.hkona.com