Ford Fusion: Tire Pressure Monitoring System / Changing Tires With a Tire Pressure Monitoring System

Ford Fusion 2013–2020 Owners Manual / Wheels and Tires / Tire Pressure Monitoring System / Changing Tires With a Tire Pressure Monitoring System

Ford Fusion. Changing Tires With a Tire Pressure Monitoring System

Note: Each road tire is equipped with a tire pressure sensor located inside the wheel and tire assembly cavity. The pressure sensor is attached to the valve stem. The pressure sensor is covered by the tire and is not visible unless the tire is removed. Take care when changing the tire to avoid damaging the sensor.

You should always have your tires serviced by an authorized dealer.

Check the tire pressure periodically (at least monthly) using an accurate tire gauge. See When Inflating Your Tires in this chapter.

Tire Pressure Monitoring System
WARNING: The tire pressure monitoring system is not a substitute for manually checking tire pressures. You should periodically check tire pressures using a pressure gauge. Failure to correctly ma ...

Understanding Your Tire Pressure Monitoring System
The tire pressure monitoring system measures pressure in your road tires and sends the tire pressure readings to your vehicle. You can view the tire pressure readings through the information disp ...

Other information:

Hyundai Kona (OS) 2018-2021 Service Manual: Fuel Pump Repair procedures
Inspection 1. Turn the ignition switch OFF, and then remove battery (-) terminal. 2. Remove the fuel pump assembly. 3. Using an ohmmeter, measure the resistance between terminals 1 and 6 of sender conn ...

Hyundai Kona (OS) 2018-2021 Service Manual: MDPS Control Unit Repair procedures
Replacement    • If a DTC occurs in the ECU, check the connectors and wiring. If no problem is found, replace the ECU.  &nb ...

© 2018-2021 www.hkona.com