Hyundai Kona: Driveshaft and axle (2WD-FF) / Differential Carrier Assembly

Propeller Shaft Repair procedures
Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tighten ...

Rear Differential Carrier Components and components location
Components Location 1. Rear drive shaft (LH) 2. Coupling assembly 3. Rear differential carrier assembly 4. Rear drive shaft (RH) 5. Propeller shaft assembl ...

Other information:

Hyundai Kona (OS) 2018-2020 Owners Manual: ISG (Idle Stop and Go) system
The ISG system is to reduce the fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill (i.e. red stop light, stop sign, and traffic jam). The engine is automatically started upon satisfying the starting conditions. The ISG system is always active, when the ...

Hyundai Kona (OS) 2018-2020 Service Manual: Muffler Repair procedures
Removal and Installation Front Muffler 1. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Enginer Cover") 2. Disconnect the battery negative terminal. 3. Disconnect the ...

© 2018-2020 www.hkona.com