Removal |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable.
|
2. |
Remove the crash pad ganish assembly (LH).
(Refer to Body - "Main Crash Pade Assembly")
|
3. |
Disconnect the ESP OFF switch connector.(A)
|
4. |
Replace the after check the switch terminal.
|
Hyundai Kona (OS) 2018-2024 Service Manual: Input shaft speed sensor 1 Specifications
Specification
Item
Specification
Type
Hall effect sensor
Operation condition
-40 to 257°F (-40 to 125°C)
Output signal (mA)
High: 11.8 - 16.8
Low: 5.9 - 8. ...
Hyundai Kona (OS) 2018-2024 Owners Manual: Corrosion protection
Protecting your vehicle from corrosion
By using the most advanced design and construction practices to combat corrosion,
we produces vehicles of the highest quality. However, this is only part of the job.
To achieve the long-term corrosion resistance your vehicle can deliver, the owner's
cooperat ...