Hyundai Kona: Brake System / ESP (Electronic Stability Program) System

Rear Wheel Speed Sensor Repair procedures

Removal [Tortion Beam Axle Type] 1. Turn the ignition switch OFF and then disconnect the negative (-) battery cable. 2. Loosen the ...

Components and components location

Components 1. ESP Control Module (HECU) 2. Front Wheel Speed Sensor 3. Rear Wheel Speed Sensor 4. ABS Warning lamp 5. EBD / Parking brake warning lamp ...

Other information:

Hyundai Kona (OS) 2018-2025 Service Manual: Description and operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization ...

Hyundai Kona (OS) 2018-2025 Service Manual: Idler Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the idler (A). Tightening torque : 42.2 - 53.9 N.m (4.3 - 5.5 kgf.m, 31.1 - 39.8 ...