Hyundai Kona: Repair procedures / Front Impact Sensor (FIS) Description and operation

Hyundai Kona (OS) 2018-2026 Service Manual / Restraint / Repair procedures / Front Impact Sensor (FIS) Description and operation

Description

•	The front impact sensors (FIS) are installed on the upper of the side panel in Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at their mounting locations.

•	The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collition. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

Front Impact Sensor (FIS) Components and components location

Components 1. Front right Impact Sensor (FIS) 2. Front left Impact Sensor (FIS) ...

Front Impact Sensor (FIS) Repair procedures

Removal • Removal of the airbag must be performed according to the precautions/ ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Head Lamps Repair procedures
Head Lamp Aiming Instructions [Mechanical Aiming] The head lamps should be aimed with the proper beam-setting equipment, and in accordance with the equipment manufacturer's instructions. ...

Hyundai Kona (OS) 2018-2026 Owners Manual: Low Tire Pressure Warning Light
This warning light illuminates: When you set the ignition switch or Engine Start/Stop button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When one or more of your tires are significantly underinflated (The location of the underinflated tires are display ...