Hyundai Kona: Light bulbs / High mounted stop lamp replacement
.png)
If the high mounted stop lamp does not operate, we recommend that you contact an authorized HYUNDAI dealer.
Rear combination lamp bulb replacement
(1) Stop/Tail lamp (2) Tail lamp(Type A), Stop/Tail lamp (Type B) (3) Turn
signal lamp (4) Rear fog lamp (LHD : Left side, RHD : Right side) (5) Backup
lamp (LHD : Right side, RHD : Left side)
Sto ...
License plate light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb.
4. Reinstall in the reverse order. ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: Power Window Switch Repair procedures
Inspection
[Driver Power Window Switch]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver door trim.
(Refer to Body - "Front Door Trim")
3.
...
Hyundai Kona (OS) 2018-2026 Service Manual: Knock Sensor (KS) Description and operation
Description
Knocking is a phenomenon characterized by undesirable vibration and noise and
can cause engine damage. Knock Sensor (KS) is installed on the cylinder block
and senses engine knocking.
When knocking occurs, the vibration from the cylinder block is applied as pres ...
