Hyundai Kona: Dual Clutch Transmission Control System / Input shaft speed sensor 2 Components and components location

Input shaft speed sensor 1 Repair procedures

Removal 1. Remove the cleaner assembly and air duct. (Refer to Engine Mechainical System - "Air Cleaner") 2. Remove the b ...

Input shaft speed sensor 2 Specifications

Specification Item Specification Type Hall effect sensor Operation condition (°C)°F -40 to 257°F (- ...

Other information:

Hyundai Kona (OS) 2018-2026 Service Manual: Water pump Repair procedures
Removal 1. Loosen the drain plug (A), and drain the engine coolant. Remove the radiator cap to drain with speed. (Refer to cooling system - "Coolant") 2. Remove the drive belt. (Refer to Timing System - " ...

Hyundai Kona (OS) 2018-2026 Owners Manual: Engine compartment panel fuse replacement
1. Turn the vehicle off. 2. Turn all other switches OFF. 3. Remove the fuse panel cover by pressing the tab and pulling up. 4. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel. 5. Push in a new fuse of the sam ...