Hyundai Kona: Dual Clutch Transmission Control System / Input shaft speed sensor 2 Specifications
Hyundai Kona (OS) 2018-2026 Service Manual / DCT (Dual Clutch Transmission) System / Dual Clutch Transmission Control System / Input shaft speed sensor 2 Specifications
| Specification |
|
Item |
Specification |
|
Type |
Hall effect sensor |
|
Operation condition (°C)°F |
-40 to 257°F (-40 to 125°C) |
|
Output signal (mA) |
High: 11.8 - 16.8 |
|
Low: 5.9 - 8.4 |
Input shaft speed sensor 2 Components and components location
Components
1. Input shaft speed sensor 1
(Odd)
2. Input shaft speed sensor 2
(Even)
...
Input shaft speed sensor 2 Description and operation
Description
•
Components location : DCT (Dual Clutch Transmission)
•
Function
The input shaft speed sensor is import ...
Other information:
Hyundai Kona (OS) 2018-2026 Service Manual: BJ Boot Components and components location
Components (1)
[Gamma 1.6 T-GDI, Nu 2.0 MPI]
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
11. Snap ring
12. TJ case
...
Hyundai Kona (OS) 2018-2026 Owners Manual: Parking brake
Always set the parking brake before leaving the vehicle, to apply:
Firmly depress the brake pedal.
Pull up the parking brake lever as far as possible.
WARNING
To reduce the risk of SERIOUS INJURY or DEATH, do not operate the parking
brake while the vehicle is moving except in an emergency situatio ...
© 2018-2026 www.hkona.com
