Ford Fusion: Seats / Memory Function

WARNING: Before activating the memory seat, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts.

WARNING: Do not use the memory function when your vehicle is moving.

This feature recalls the position of the following features:

The memory control is on the driver door.

Ford Fusion. Memory Function

Saving a PreSet Position

  1. Adjust the memory features to the position you prefer.
  2. Press the SET button until you hear a single tone.
  3. Press the preset button you prefer until you hear a single tone.

You can save up to two preset memory positions. You can save a memory preset at any time.

Recalling a PreSet Position

Press and release the preset button associated with the driving position you prefer. The memory features move to the position stored for that preset.

Note: You can only recall a preset memory position when you switch the ignition off, or when the transmission is in park (P) or neutral (N) if the ignition is on and the vehicle is not moving.

You can also recall a preset memory position by:

Note: Using a linked key fob to recall your memory position when the ignition is off moves the seat to the Easy Entry position.

Note: Pressing any active memory feature control or any memory button during a memory recall cancels the operation.

Linking a PreSet Position to your Remote Control or Intelligent Access Key Fob

Your vehicle can save the preset memory positions for up to two remote controls or intelligent access keys.

After you save the memory preset positions you prefer:

  1. Press and hold the preset button you prefer for about three seconds until you hear a single tone.
  2. Within three seconds, press the lock button on the remote control you are linking.

To unlink a remote control, follow the same procedure – except in step 2, press the unlock button on the remote control.

Note: If more than one linked remote control or intelligent access key is in range, the memory function moves to the settings of the first key to initiate a memory recall.

Easy Entry and Exit Feature

If you enable the easy entry and exit feature, it moves the driver seat position rearward up to 2 in (5 cm) when you switch the ignition off.

The driver seat returns to the previous position when you switch the ignition on. You can enable or disable this feature through the information display.

Power Seats (IF EQUIPPED)
WARNING: Do not adjust the driver seat or seatback when your vehicle is moving. WARNING: Do not place cargo or any objects behind the seatback before returning it to the original position. Note: D ...

Rear Seats
Note: Your vehicle may have split seatbacks that you must fold individually. Note: Make sure the center safety belt is unbuckled before folding the seatback. To lower the seat back(s) from inside th ...

Other information:

Hyundai Kona (OS) 2018-2021 Owners Manual: LCD display messages
Shift to P (for smart key system and dual clutch transmission) This warning message is displayed if you try to turn off the engine without the shift lever in P (Park) position. At this time, the Engine Start/Stop button turns to the ACC position (If you press the Engine Start/Stop button once more ...

Hyundai Kona (OS) 2018-2021 Service Manual: Components and components location
Components 1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing 5. Crankshaft lower bearing 6. Thrust bearing 7. Main bearing cap 8. External damper flywheel 9. Crankshaft sproket 10. Crankshaft pulley 11. Wate ...

© 2018-2021 www.hkona.com