Hyundai Kona: Installing a Child Restraint System (CRS) / Securing a Child Restraint System with the “ISOFIX Anchorage System”

To install an i-Size or ISOFIX-compatible Child Restraint System in either of the rear outboard seating positions:

1. Move the seat belt buckle away from the ISOFIX anchorages.

2. Move any other objects away from the anchorages that could prevent a secure connection between the Child Restraint System and the ISOFIX anchorages.

3. Place the Child Restraint System on the vehicle seat, then attach the seat to the ISOFIX anchorages according to the instructions provided by the Child Restraint System manufacturer.

4. Follow the instructions of the Child Restraint System's manufacturer for proper installation and connection of the ISOFIX attachments on the Child Restraint System to the ISOFIX anchorages.

WARNING

Take the following precautions when using the ISOFIX system:

ISOFIX anchorage and top-tether anchorage (ISOFIX anchorage system) for children
The ISOFIX system holds a Child Restraint System during driving and in an accident.This system is designed to make installation of the Child Restraint System easier and reduce the possibility of imp ...

Securing a Child Restraint System seat with “Top-tether Anchorage” system
Top-tether anchorages for Child Restraint Systems are located on the rear of the seatbacks. 1. Route the Child Restraint System top-tether strap over the seatback. Placing the top tether strap, pl ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Engine Room Under Cover Repair procedures
Removal and Installation 1. Loosen the mounting clip and bolt and then remove the under cover (A). Tightening torque : 3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 Ib-ft) 2. Insta ...

Hyundai Kona (OS) 2018-2024 Service Manual: Specifications
Specification Item Type Bulb Watt (W) Front Head lamp Halogen Low beam / High beam H7LL 55 Halogen + LED ...

© 2018-2024 www.hkona.com